When looking for the right bolt for the application, a variety of measurement methods should be considered.
The pitch of a bolt refers to the distance between its threads,It's generally divided into standard pitch, fine pitch and super fine pitch. The finer the pitch, the tighter the thread.
These categories represent specific measurements based on the thread size. For example, for standard size M20 bolts, the pitch of coarse threads is always 2.5 mm, the pitch of fine threads is 2.0 mm, and the pitch of ultra-fine threads is 1, 5 mm.
It is important to select the proper pitch when choosing bolts for any project to ensure that they hold firmly and securely. The pitch of a bolt can be found on the label or packaging, or by measuring the length of the bolt and counting the number of threads within a given distance.
Choosing the right bolt pitch can make a significant difference in the success and safety of any project. So, whether you are building a large structure or just fixing a small piece of furniture, be sure to take the time to select the proper bolt pitch for the job.
The most obvious measurement is the length and diameter of the bolts, but other aspects of the fastener should also be measured to ensure the most accurate fit.
If you are looking for a screw bolt with a standard pitch, you do not need to specify it when making an inquiry, because it is usually assumed that you are looking for a standard pitch, unless you specify otherwise.Or you are looking for a thread pitch other than the standard measurement, such as fine or ultra-fine threads, you should make sure to state it in the inquiry.
we recommend that you order them in advance to ensure they are available when needed.